Pöter, B.; Stein, F.; Spiegel, M.: Oxidation Behaviour of Fe–Al Alloys Analysed Using In- and Ex-situ Techniques. EUROCORR 2004, Nice, France (2004)

Rohwerder, M.; Hausbrand, R.; Stratmann, M.: The role of the electrode potential at the buried polymer/metal interface on electrochemically driven delamination: The case MgZn₂. ISE Annual Meeting, Thessaloniki, Greece (2004)

Rohwerder, M.; Michalik, A.; Paliwoda, G.; Stratmann, M.: Leitfähige Polymere für den Korrosionsschutz: Chancen and Risiken. DGO (GDCh) Jahrestagung, Graz, Austria (2004)

Schuster, J. C.; Palm, M.: (Re-assessment of) The Al–Ti System. Thermodynamics of Alloys (TOFA 2004), Vienna, Austria (2004)

Stallybrass, C.; Schneider, A.; Sauthoff, G.: Mechanisches Verhalten neuartiger ferritischer Fe–Al–Ni–Cr - Legierungen mit intermetallischen (Ni,Fe)Al - Ausscheidungen bei hohen Temperaturen. Werkstoffwoche 2004 - Kongress für innovative Werkstoffe, Verfahren und Anwendungen, DGM, München, Germany (2004)

Stein, F.; Jiang, D.; Palm, M.; Sauthoff, G.: Laves Phase Polytypism in the Co–Nb System. TOFA 2004 - Discussion Meeting on Thermodynamics of Alloys, Wien, Austria (2004)

Zaefferer, S.: High Resolution EBSD Investigations of the Recrystallization Behaviour of a cold rolled Ni3Al single crystal. 2nd International Joint Conference on Recrystallization and Grain Growth, Annecy, France (2004)

Varnik, F.: Non linear rheology and dynamic yielding: A molecular dynamics study. SIMU 2004 conference, Bridging the scales, Genova, Italy (2004)

Raabe, D.: Recrystallization in Polymers – Experiments and Simulations. Invited Keynote lecture, 2nd International Conference on Recrystallization and Grain Growth, REX&GG 2004 Annecy, Annecy, France (2004)

Dorner, D.; Lahn, L.; Zaefferer, S.: Investigation of the primary recrystallisation microstructure of cold rolled and annealed Fe3%Si single crystals with Goss orientation. 2nd Joint International Conference on Recrystallization and Grain Growth (Rex&GG2), Annecy, France (2004)

Stratmann, M.: Tailored semiconducting oxides for improved corrosion resistance and adhesion of organic coatings. Gordon Research Conference on Aqueous Corrosion, New London, NH, USA (2004)

Parezanovic, I.; Poeter, B.; Spiegel, M.: B and N segregation on dual phase steel after annealing. DIMAT, Krakow, Poland (2004)

Raabe, D.: Microstructure Scales in Materials Simulation. Lecture at the Gordon Conference on Physical Metallurgy, New Hampshire, USA (2004)

Frommeyer, G.: Superplasticity at Higher Strain Rates in Ultrafine Grained a-Titanium / Ti_xMe_y-Intermetallic Ti-8Fe-4Al, Ti-10Co-4Al and Ti-10Ni-4Al Alloys. Euro-SFP Albi, France (2004)

Dorner, D.; Zaefferer, S.: Microstructure and texture of shear bands in cold rolled silicon steel single crystals of Goss orientation. 2nd International Conference on Texture and Anisotropy of Polycrystals (ITAP2), Metz, France (2004)

Park, E.; Hüning, B.; Spiegel, M.: Annealing of Fe–15Cr alloy in N₂–5%H₂ gas mixture: Effect of hydrogen concentration. DIMAT, Krakow, Poland (2004)

Neumann, P.: Material separation by plastic deformation. Meeting, Brno/CZ (2004)

Song, R.; Ponge, D.; Kaspar, R.: Review of the properties and methods for production of ultrafine grained steels. Lecture at the SMEA Conference 2003, Sheffield (2004)

Grundmeier, G.; Wapner, K.; Stratmann, M.: Applications of a new height regulated Scanning Kelvin Probe for the study of polymer/metal interfaces in corrosive environments. ICEPAM 2004, Helsinki, Finnland (2004)

Neumann, P.: Kompatibilitätsspannungen – ein Schlüssel zum Verständnis der Ermüdungsrissbildung an Korngrenzen. Kolloquium, Universität Erlangen, Germany (2004)