Grundmeier, G.; Wapner, K.; Schönberger, B.; Stratmann, M.: Fundamentals and Applications of a new height regulated Scanning Kelvin Probe in Corrosion and Adhesion Science. ISE 2004, Thessaloniki, Greece (2004)

Grundmeier, G.; Wapner, K.; Schönberger, B.; Stratmann, M.: Introduction of a height regulated Scanning Kelvin Probe for the simultaneous measurement of surface topography and interfacial electrode potentials in corrosive environments. ISE Conference, 55th Annual Meeting, Thessaloniki, Greece (2004)

Grundmeier, G.; Wapner, K.; Stratmann, M.: Tailored adhesion promoting and corrosion resistant thin plasma polymer films at adhesion/metal interface. Ninth International Conference on Plasma Surface Engineering, Garmisch-Partenkirchen, Germany (2004)

Hassel, W.; Tan, K. S.; Stratmann, M.: Examination of particle-surface contact under tribo-corrosion conditions with a novel low force micro indenter. 55th Meeting of the International Society of Electrochemistry, Thessaloniki, Greece (2004)

Lill, K. A.; Stratmann, M.; Frommeyer, G.; Hassel, A. W.: On the corrosion resistance of a new class of FeCrAl light weight ferritic steels. 55th Meeting of the International Society of Electrochemistry, Thessaloniki, Greece (2004)

Paliwoda-Porebska, G.; Michalik, A.; Stratmann, M.; Rohwerder, M.: Conducting polymer coatings for corrosion protection: Pros and cons. ISE Annual Meeting, Thessaloniki, Greece (2004)

Wicinski, M.; Hassel, A. W.; Stratmann, M.: Corrosion under Cyclic Conditions Monitored by a Simultaneous Scanning Kelvin Probe and Galvanic Current Measurement. 55rd Meeting of the International Society of Electrochemistry, Thessaloniki, Greece (2004)

Frommeyer, G.: Mikrostruktur und Eigenschaften hoch-siliziumhaltiger Titanlegierungen. Meeting, Bestwig, Germany (2004)

Bernst, R.; Spiegel, M.; Schneider, A.: Metal dusting of Fe–Al alloys at 600 °C in CO–H₂–H₂O gas mixtures. EUROCORR 2004, Nice, France (2004)

Cha, S. C.; Spiegel, M.: Local reactions between NaCl and KCl particles and metal surfaces. EUROCORR, Nice, France (2004)

Eleno, L. T. F.; Balun, J.; Inden, G.; Houserova, J.; Schneider, A.: Experimental study and thermodynamic modelling of the Fe-Ta equilibrium phase diagram. TOFA, Discussion Meeting on Thermodynamics of Alloys, Wien, Austria (2004)

Park, E.; Hüning, B.; Spiegel, M.: Effects of heat treatment on the oxide layer of Fe–15 at.% Cr alloy surface. EUROCORR, Nice, France (2004)

Ruh, A.; Spiegel, M.: Influence of HCl and water vapour on the corrosion kinetics of Fe beneath molten ZnCl₂/KCl. EUROCORR, Nice, France (2004)

Blumenau, A. T.; Eberlein, T. A. G.; Jones, R.; Öberg, S.; Frauenheim, T.; Briddon, P. R.: The effect of charge on Basal dislocations in silicon carbide. EDS 2004, Chernogolovka, Russia (2004)

Yang, L.; Grundmeier, G.: Nanomechanical studies of thin tailored plasma polymers on organic coatings. 5th European Symposium on Nano-mechanical Testing, Hückelhoven, Germany (2004)

Grundmeier, G.; Wapner, K.: Water diffusion measurements in a model adhesive/silicon lap joint using FTIR-spectroscopy: Differentiation between bulk and interfacial diffusion. Euradh 2004, Freiburg, Germany (2004)

Wapner, K.; Grundmeier, G.: Extended Abstract: Water diffusion measurements in a model adhesive/silicon lap joint using FTIR-spectroscopy: differentiation between bulk and interfacial diffusion. Euradh2004/Adhesion2004, Freiburg, Germany (2004)

Wapner, K.; Stratmann, M.; Grundmeier, G.: Extended Abstract: Non-destructive, in-situ measurement of de-adhesion processes at buried adhesive/metal interfaces by means of a new scanning Kelvin probe blister Test. Euradh2004/Adhesion2004, Freiburg, Germany (2004)

Hassel, A. W.: Elementary processes in particle induced flow corrosion. Eurocorr 2004, Nice, France (2004)

Konrad, J.; Raabe, D.; Zaefferer, S.: Investigation of Nucleation Mechanisms of Recrystallization in Warm Rolled Fe3Al Base Alloys. 2nd International Conference on Recrystallization and Grain Growth, Annecy, France (2004)