Udyansky, A.; von Pezold, J.; Dick, A.; Neugebauer, J.: Orientational ordering of interstitial atoms and martensite formation in dilute Fe-based solid solutions. Physical Review B 83 (18), S. 184112-1 - 184112-11 (2011)

Van Putten, K.; Roters, F.; Kirch, D.; Hirt, G.: Experimental and numerical investigations of the plane strain compression of an oligocrystalline pure copper specimen. Journal of Materials Processing Technology 211, S. 1305 - 1323 (2011)

Wang, L.; Barabash, R. I.; Yang, Y.; Bieler, T.R.; Crimp, M.A.; Eisenlohr, P.; Liu, W.; Ice, G.E.: Experimental Characterization and Crystal Plasticity Modeling of Heterogeneous Deformation in Polycrystalline α-Ti. Metallurgical and Materials Transactions A 42 (3), S. 626 - 635 (2011)

Yang, Y.; Wang, L.; Bieler, T.; Eisenlohr, P.; Crimp, M.: Quantitative Atomic Force Microscopy Characterization and Crystal Plasticity Finite Element Modeling of Heterogeneous Deformation in Commercial Purity Titanium. Metallurgical and Materials Transactions A 42 (3), S. 636 - 644 (2011)

Zaefferer, S.: Orientation microscopy in SEM and TEM: A critical review. Crystal Research and Technology 46, S. 607 - 628 (2011)

Zambaldi, C.; Roters, F.; Raabe, D.: Analysis of the plastic anisotropy and pre-yielding of (gamma/alpha2)-phase titanium aluminide microstructures by crystal plasticity simulation. Intermetallics 19 (6), S. 820 - 827 (2011)

Zhang, H.; Bai, B.; Raabe, D.: Superplastic martensitic Mn-Si-Cr-C steel with 900% elongation. Acta Materialia 59, S. 5787 - 5802 (2011)

Alkauskas, A.; Deak, P.; Neugebauer, J.; Pasquarello, A.; van de Walle, C. G. (Hg.): Advanced Calculations for Defects in Materials: Electronic Structure Methods. WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim, Germany (2011), 384 S.

Topalov, A. A.; Mayrhofer, K. J. J.: Automation of laboratory equipment for high-throughput electrochemical experiments. In: Begleitband zum 16. VIP-Kongress, Virtuelle Instrumente in der Praxis 2011, S. 30 - 32 (Hg. Jamal, R.; Heinze, R.). VDE-Verlag, Berlin, Germany (2011)

Dumont, M.; Pyzalla, A. R.; Kostka, A.; Borbély, A.: Characterization of sauropod bone structure. In: Biology of the sauropod dinosaurs: understanding the life of giants, S. 150 - 169 (Hg. Klein, N.; Remes, K.; Sander, P.M.). Indiana University Press, Bloomington and Indianapolis (2011)

Fabritius, H.; Sachs, C.; Raabe, D.; Nikolov, S.; Friák, M.; Neugebauer, J.: Chitin in the exoskeletons of arthropoda: From ancient design to novel materials science. In: Chitin, S. 35 - 60 (Hg. editor), N. S. G. (.). Springer, Germany (2011)

Palm, M.; Bewlay, B. P.; Kumar, K. S.; Yoshimi, K. (Hg.): Intermetallic-Based Alloys for Structural and Functional Applications (Symposium N – Intermetallic-Based Alloys for Structural and Functional Applications, 1295). MRS Fall Meeting 2010, Boston, MA, USA, 29. November 2010 - 03. Dezember 2010. Cambridge University Press, Cambridge, UK (2011), 460 S.

Hickel, T.; Nazarov, R.; von Pezold, J.; Friák, M.; Neugebauer, J.; Ismer, L.: Identification of hydrogen related mechanisms in steels using ab initio methods. Proceedings of Steel Hydrogen Conference, Ghent, Belgium, 28. September 2011. (2011)

Berezkin, A. V.; Biedermann, P. U.; Auer, A. A.: Mesoscale simulation of network formation and structure, combining molecular dynamics and kinetic Monte Carlo approaches. European Polymer Congress 2011, Granada, Spain, 26. Juni 2011 - 01. Juli 2011. (2011)

Hickel, T.; Grabowski, B.; Körmann, F.; Neugebauer, J.: Advancing DFT to finite temperatures: Methods and applications in steel design. PSI-k Newsletter 105, S. 22 - 50 (2011)

Freysoldt, C.; Neugebauer, J.; Van de Walle, C. G.: Electrostatic interactions between charged defects in supercells. CECAM Workshop, Lausanne, Switzerland, 08. Juni 2009 - 10. Juni 2009. Physica Status Solidi B 248 (5), S. 1067 - 1076 (2011)

Sigel, R.; Erbe, A.: Treatment of Smearing in Ellipsometry. In: Proceedings of the Workshop Nano Structures on Surfaces and Light Scattering, S. 55 - 58. Workshop "Nano structures on surfaces and light scattering", Institut für Werkstofftechnik, IWT, Bremen, Germany, 24. März 2011 - 25. März 2011. (2011)

Barnoush, A.; Zamanzade, M.; Palm, M.: Evaluation of sensivity to hydrogen embrittlement in Fe₃Al–xCr alloys with different chromium concentration. In: Proceedings Discussion Meeting on the Development of Innovative Iron Aluminium Alloys, S. 79 - 84. FeAl2011, Discussion Meeting on the Development of Innovative Iron Aluminium Alloys, Lanzarote, Canary Islands, Spain, 2011. (2011)

Chakravadhanula, V. S. K.; Kelm, K.; Kienle, L.; Düppel, V.; Lotnyk, A.; Sturm, D.; Heilmaier, M.; Schmitz, G. J.; Drevermann, A.; Stein, F. et al.; Palm, M.: TEM Studies of the Ternary Ti₃₆Al₆₂Nb₂Alloy. 2010 MRS Fall Meeting, Boston, MA, USA, 29. November 2010 - 03. Dezember 2010. Materials Research Society Symposium Proceedings 1295, S. 119 - 124 (2011)

Chakravadhanula, V. S. K.; Kelm, K.; Kienle, L.; Düppel, V.; Lotnyk, A.; Sturm, D.; Heilmaier, M.; Schmitz, G. J.; Drevermann, A.; Stein, F. et al.; Palm, M.: TEM Studies of the Ternary Ti₃₆Al₆₂Nb₂ Alloy. In: Materials Research Society Symposium Proceedings, Bd. 1295, S. 119 - 124 (Hg. Palm, M.; Bewlay, B. P.; Kumar, K. S.; Yoshimi, K.). MRS Fall Meeting 2010, Boston, MA, USA, 29. November 2010 - 03. Dezember 2010. Materials Research Society 2011, Warrendale, PA, USA (2011)