Roters, F.; Ma, A.; Raabe, D.: A dislocation density based constitutive model for crystal plasticity FEM. Dislocations, Plasticity, Damage and Metal Forming: Material Response and Multiscale Modeling, S. 445 - 447 (2005)

Ruh, A.; Spiegel, M.: Salt melt induced etching phenomena on metal surfaces. Eurocorr 2005, Lisbon, Portugal, 04. September 2005 - 08. September 2005., (2005)

Savini, G.; Heggie, M. I.; Ewels, C. P.; Martsinovich, N.; Jones, R.; Blumenau, A. T.: Structure and energy of the 90 degrees partial dislocations in Wurtzite-GaN. Materials Science Forum 483, S. 1057 - 1060 (2005)

Spiegel, M.: Stability of CVD coatings in simulated biomass combustion environments. Eurocorr 2005, Lisbon, Portugal, 04. September 2005 - 08. September 2005., (2005)

Spiegel, M.; Parezanovic, I.: Selective Oxidation and Segregation during Annealing of Steels. 6th International Conference on the Microscopy of Oxidation, Birmingham, UK, 04. April 2005 - 06. April 2005. Mater. at High Temp., Proc. of Microscopy of Oxidation, (2005)

Stein, F.; Dovbenko, O. I.; Palm, M.: Experimental investigations of structure type variations of Laves phases. In: Proceedings International Conference: Modern Material Science: Achievements and Problems, S. 55 - 56. Modern Material Science MMS-2005, Kiev, Ukraine. Skorokhod, V. V., Kiev, Ukraine (2005)

Wichern, C. M.; Rasp, W.: Measuring and Quantifying the Surface-Roughness Anisotropy of Modelled and Industrial Produced Surfaces. Proc. 11th Int. Conf. on Sheet Metal, S. 573 - 580 (2005)

Wichern, C. M.; Rasp, W.: Improved Deformability of Intermetallic Materials by Superimposition of Hydrostatic Pressure. In: Proc. 8th ICTP (CD-ROM). 8th ICTP 2005: International Conference on Technology of Plasticity, Verona, Italy, 09. Oktober 2005 - 13. Oktober 2005. (2005)

Hassel, A. W.: Ordered Arrays of single crystalline refractory metal nanowires. International Center for Young Scientist – Seminar, Tsukuba, Japan (2005)

Raabe, D.: Neues aus der Eisenzeit - Simulationen und Experimente in der Kristallmechanik und frischer Hummer. Lise-Meitner-Kolloquium, Hahn-Meitner-Institut (HMI), Berlin, Germany (2005)

Raabe, D.: Integrative Werkstoffmodellierung. Finalizing Conference of Sonderforschungsbereich SFB 370, together with an international Konferenz “Integral Materials Modeling”, Aachen, Germany (2005)

Grundmeier, G.: Advanced Interface Analysis and Interfacial Engineering of Coil Coated Materials. International Symposium on Coil Coating, Paris, France (2005)

Sachs, C.; Fabritius, H.; Romano, P.; Raabe, D.: Viscoelastic Behavior of Lobster Cuticle as a Function of Mineralization Grade. MRS Fall Meeting, Boston, MA, USA (2005)

Lymperakis, L.; Neugebauer, J.: Electronic properties of non-stoichiometric dislocation cores in GaN. Materials Research Society fall meeting, Boston, MA, USA (2005)

Spiegel, M.: Chlorkorrosion an Metallen. Seminar Werkstoffzentrum Rheinbach, Rheinbach, Germany (2005)

Zaefferer, S.: The Goss texture formation in silicon steels: Oriented nucleation or growth selection? Materials Science Seminar PAN, Krakow, Poland (2005)

Zaefferer, S.: Application of orientation microscopy in SEM and TEM for the study of texture formation during recrystallisation processes. Materials Science Seminar, Institute for Materials Science, Krakow, Poland (2005)

Frommeyer, G.; Gnauk, J.; Frech, W.: Wire casting and in-rotating-liquid-spinning processes for the continuous production of wires and high strength and soft magnetic fibres. 12th ISIJ-VDEh Seminar, Kitakyushu, Japan (2005)

Frommeyer, G.; Gnauk, J.; Frech, W.: Wire casting and in-rotating-liquid-spinning processes for the continuous production of wires and high strength and soft magnetic fibres. ISIJ-VDEh Deutsch-Japanisches Seminar, Fukuoka, Japan (2005)

Zaefferer, S.: Möglichkeiten und Grenzen der Orientierungsmikroskopie mittels EBSD im Rasterelektronenmikroskop. Werkstoffausschuss & Unterausschuss für Metallographie, Werkstoffanalytik und -simulation des VdeH, Düsseldorf (2005)