Palm, M.: Intermetallische Phasen für Hochtemperaturanwendungen. Werkstofftechnisches Kolloquium „Neuere Werkstoffe und Verfahren“, Staatl. Materialprüfungsanstalt, Darmstadt (2002)

Rohwerder, M.; Hornung, E.; Stratmann, M.: Microscopic and Submicroscopic Aspects of Delamination. 5. Workshop “Nanometerschutzschichten: Untersuchung der Grenzfläche Schicht-Struktur”, Nanotechnologie-Kompetenzzentrum „Ultradünne funktionale Schichten“, Braunschweig, Germany (2002)

Stratmann, M.: High-Tec und Stahl – neue Ansätze zur Oberflächenveredelung von Eisenbasislegierungen. 17. Aachener Stahlkolloquium, Aachen, Germany (2002)

Knezevic, V.; Sauthoff, G.; Vilk, J.; Inden, G.; Agamennone, R.; Blum, W.; Wang, Y.; Scholz, A.; Berger, C.; Ehlers, J. et al.; Singheiser, L.: Martensitic/Ferritic Super Heat-Resistant 650°C Steels - Design and Testing of Model Alloys. The First International Conference on Advanced Structural Steels (ICASS 2002), Tsukuba, Japan (2002)

Palm, M.; Sauthoff, G.: Characterization and Processing of an Advanced Intermetallic NiAl-Base Intermetallic Alloy for High-Temperature Applications. Structural Intermetallics 2001 (ISSI-3), Jackson Hole, Wyoming (2002)

Stratmann, M.: The atmospheric corrosion of iron and steel a historic review and future perspectives. Symposium on Corrosion Science - A Retrospective and Current Status in Honor of Robert P Frankenthal - 201st Meeting of the Electrochemical Society, Philadelphia, PA, USA (2002)

Raabe, D.: Polycrystal Mechanics. Colloquium at the National Institute for Standards and Technology NIST, Washington, D.C., USA (2002)

Raabe, D.: Simulation of Recrystallization. Colloquium lecture at Wright Patterson Research Center, Dayton, Ohio (2002)

Spiegel, M.: Influence of HCl, SO₂ and deposits on the corrosion of boiler steels. Meeting, Chalmers University, Göteborg, Sweden (2002)

Stratmann, M.: Adhesion and Delamination of Coatings for Corrosion Protection. Expert Meeting: Surface Modification, BASF Ludwigshafen, Germany (2002)

Palm, M.: Evaluation of alloy systems for developing new intermetallic lightweight intermetallic materials. Colloquium at CIRIMAT-ENSIACET, Toulouse, France (2002)

Stein, F.; Zhang, L.; Palm, M.; Sauthoff, G.: Al-Ti Alloys with Al-Rich Titanium Aluminides: Phase Equilibria, Evolution of Phases and Strength of Lamellar TiAl+r-Al₂Ti Alloys. Structural Intermetallics 2001 (ISSI-3), Jackson Hole, Wyoming, USA (2002)

Grundmeier, G.; Schinkinger, B.: Spectroscopic and Microscopic Analysis of Thin SiO2 Combustion CVD layers for Surface Engineering of Galvanised Steel. Conference Proceedings, Adhesion and Surface Analysis, Loughborough, UK (2002)

Sauthoff, G.: Laves-Phasen für Werkstoffentwicklungen? Workshop "Laves Phases", Dresden, Germany (2002)

Diesing, D.; Hassel, A. W.: Transient states in the breakdown of thin oxide films. Jahrestagung der Deutschen Physikalischen Gesellschaft, Regensburg, Germany (2002)

Sauthoff, G.: Intermetallic Phases - Demands, Problems and Perspectives. AKF-Frühjahrstagung der DPG: Symposium on Structurally Complex Alloy Phases (SCAP), Regensburg, Germany (2002)

Palm, M.: Laves phases in various ternary systems. Workshop „Laves Phases“, MPI für Chemische Physik fester Stoffe, Dresden, Germany (2002)

Stein, F.; Palm, M.; Sauthoff, G.: Crystal Structure Type Variations in Laves Phase Compounds. Workshop "Laves Phases", Dresden, Germany (2002)

Stein, F.; Palm, M.; Sauthoff, G.: Intermetallic Laves Phase Compounds - Cubic vs. Hexagonal Crystal Structure. AKF-Frühjahrstagung der DPG: Symposium on Structurally Complex Alloy Phases (SCAP), Regensburg, Germany (2002)

Wasilkowska, A.; Bartsch, M.; Palm, M.; Stein, F.; Sauthoff, G.; Messerschmidt, U.: Mikrostruktur und mechanische Eigenschaften von Fe–Al mit verstärkender Zr(Fe,Al)₂-Phase. AKF-Frühjahrstagung der DPG 2002, Regensburg, Germany (2002)