Konferenzbeitrag (465)
4161.
Konferenzbeitrag
Intermetallic Alloys and Ferritic Steels for High-Temperature Applications. In: Proc. 9th Intern. Conf. Ultra-High Purity Base Metals (UHPM-2002), S. 133 (Hg. Abiko; K.; Takaki; S.). 9th Intern. Conf. Ultra-High Purity Base Metals (UHPM-2002), Sendai, Japan. (2002)
4162.
Konferenzbeitrag
Degradation of strained organic coatings. In: 15th International Corrosion Congress, S. S12-A. (2002)
4163.
Konferenzbeitrag
Korrosion durch Beläge und Salzschmelzen. In: VGB Fachtagung: Thermische Abfallverwertung, Proceedings VGB PowerTech. (2002)
4164.
Konferenzbeitrag
The role of alloying elements on the corrosion in oxidizing and chloridizing gases. In: Corrosion 2001, S. 1 - 10. Corrosion 2001, Houston, Texas, USA, 2001. (2002)
4165.
Konferenzbeitrag
2002, S. 89 - 103. Symposium on Corrosion Science - A Retrospective and Current Status in Honor of Robert P Frankenthal, Philadelphia, PA, USA, 13. Mai 2002 - 16. Mai 2002. (2002)
The atmospheric corrosion of iron and steel a historic review and future perspectives. In: Corrosion Science: A Retrospective and Current Status in Honor of Robert Frankenthal, Bd. 4166.
Konferenzbeitrag
Advanced electrochemical techniques in corrosion research. 15th International Corrosion Congress: Frontiers in Corrosion Science and Technology, S. 353 - 354 (2002)
4167.
Konferenzbeitrag
High-tech und Stahl-Neue, Ansätze zur Oberflächenveredelung von Stahl. 17. Aachener Stahlkolloquium Werkstofftechnik: Perspektive mit Stahl, S. 93 - 100 (2002)
4168.
Konferenzbeitrag
Effect of Sulfate and Chloride Ions on Corrosion Potential and Corrosion Rate Transient during Atmospheric Corrosion of Low Alloy Steels. 15, Technical Research Laboratories, S. 22 - 29 (2002)
4169.
Konferenzbeitrag
Martensitic/ferritic super heat-resistant 650 °C steels - Thermodynamics and kinetics of precipitation reactions. In: Proc. 7th Liège Conf, S. 1299 - 1310 (Hg. Lecomte-Beckers, J.; Carton, M.; Schubert, F.; Ennis, P.J.). Materials for Advanced Power Engineering, Liège, Belgium, 30. September 2002 - 02. Oktober 2002. Forschungszentrum Jülich, Jülich, Germany (2002)
4170.
Konferenzbeitrag
The application of the scanning Kelvin probe for investigating the deadhesion of adhesives on iron and zinc. In: EURADH. IOM Communications, S. 24 - 27. EURADH. IOM Communications, Glasgow, UK. (2002)
4171.
Konferenzbeitrag
On the forming limit diagram, von Mises equivalent strain, strain path, and surface roughness. In: Proc. XXI Verformungskundliches Kolloquium, S. 156 - 164. Verformungskundliches Kolloquium, Leoben, Austria, 2002. Selbstverlag Montanuniversität Leoben, Leoben, Austria (2002)
4172.
Konferenzbeitrag
Decomposition of cementite during gas carburization. In: EUROCORR 2001, 1. Proc. EUROCORR 2001, Riva del Garda, Italy, 2001. (2002)
4173.
Konferenzbeitrag
Characterization and processing of an advanced intermetallic NiAl-based alloy for high-temperature applications. In: Structural Intermetallics 2001 -ISSI-3 (Hg. Hemker, K.J.; Dimiduk, D.M.; Clemens, H.; Darolia, R.; Inui, H. et al.). International Symposium on Structural Intermetallics 2001 - ISSI-3, Jackson Hole, USA, 23. September 2001 - 27. September 2001. TMS, Warrendale (2001)
4174.
Konferenzbeitrag
2001, S. 618 - 622 (Hg. Sinclair, J.; Frankenthal, R.; Kalman, E.; Plieth, W.). Electrochemical Society Inc., Pennington, NJ 08534-2839 USA (2001)
Scanning KelvinProbe Force Microscopy - Chances and limitations for in situ delamination measurements. In: Corrosion and Corrosion Protection, Bd. 4175.
Konferenzbeitrag
646, S. N6.8.1 - N6.8.6 (2001)
Long-term creep and oxidation behavior of a Laves phase-strengthened NiAl-Ta-Cr alloy for gas turbine applications. High-Temperature Ordered Intermetallic Alloys IX, Boston, MA, USA, 27. November 2000 - 29. November 2000. Materials Research Society Symposium Proceedings 4176.
Konferenzbeitrag
117/3, S. 1 - 11 (2001)
Evaluation of alloy systems for developing new intermetallic lightweight materials. Int. Conf. on Processing & Manufacturing of Advanced Materials - THERMEC 2000, Las Vegas, NV, USA, 04. Dezember 2000 - 08. Dezember 2000. Journal of Materials Processing Technology 4177.
Konferenzbeitrag
High alloyed stainless steels containing Co, Mn, Mo, Ni, Si as possible cathode current collectors in MCFC. In: Proceedings of International Congress on Advanced Materials, S. 1 - 8. Materials Week 2001, International Congress on Advanced Materials, München, Germany, 01. Oktober 2001 - 04. Oktober 2001. (2001)
4178.
Konferenzbeitrag
Investigation of the delamination of polymer-coated zinc and steel surfaces with the scanning Kelvin probe in a climatic cycle test. In: GALVATECH 2001, Conf. Proc., S. 585 - 592. GALVATECH 2001, Brussels, Belgium, 26. Juni 2001 - 28. Juni 2001. Stahleisen Verlag, Düsseldorf, Germany (2001)
4179.
Konferenzbeitrag
Al–Ti Alloys with Al-Rich Titanium Aluminides: Phase Equilibria, Evolution of Phases, and Strength of Lamellar TiAl + r-Al2Ti Alloys. In: Conf. Proc. "Structural Intermetallics", S. 495 - 504 (Hg. Hemker, K. J.; Dimiduk, D. M.; Clemens, H.; Darolia, R.; Inui, H. et al.). 3rd Int. Symp. "Structural Intermetallics 2001", TMS, Warrendale, PA, USA. (2001)
4180.
Konferenzbeitrag
Effect of Chemical Composition, Coiling Temperature and Solute Elements on Recrystallization Behaviour of Cold Rolled ULC Steels. In: Recrystallization and Grain Growth (Hg. Gottstein, G.; Molodov, D.). First Joint International Conference on Recrystallization and Grain Growth (ReX&GG), Aachen, Germany, 27. August 2001 - 31. August 2001. Springer, Germany (2001)