Palm, M.; Schneider, A.; Stein, F.; Sauthoff, G.: Strengthening of Iron Aluminide Alloys for High-Temperature Applications. Materials Research Society Symposium Proceedings 842, S. 3 - 14 (2005)

Parezanović, I.; Spiegel, M.: Improving Zn-wettability of Fe-Al alloys by selective oxidation/reduction treatments. Eurocorr 2005, Lisbon, Portugal, 04. September 2005 - 08. September 2005., (2005)

Park, E.; Spiegel, M.: Development and Composition of the High Temperature Oxide Film Grown on Fe-15Cr during Annealing. Passivity 9, Paris, France, 27. Juni 2005 - 01. Juli 2005., (2005)

Raabe, D.; Al-Sawalmih, A.; Romano, P.; Sachs, C.; Brokmeier, H. G.; Yi, S. B.; Servos, G.; Hartwig, H. G.: Structure and crystallographic texture of arthropod bio-composites. In: Materials Science Forum, Proceedings of the 14th International Conference on Textures of Materials ICOTOM 14, S. 1665 - 1674. 14th International Conference on Textures of Materials ICOTOM 14, Leuven, Belgium, 11. Juli 2005 - 15. Juli 2005. Trans Tech Publications, Switzerland (2005)

Raabe, D.; Sachs, C.: Mesostructure of the Exoskeleton of the Lobster Homarus Americanus. Mater. Res. Soc. Sympos. Proc. 874, L.5.3, S. 161 - 166 (2005)

Rablbauer, R.; Brüx, U.; Frommeyer, G.: Werkstoffkonzepte hochfester und hochduktiler Leichtbaustähle. In: Tagungsband 5. Industriekolloquium SFB 362 Fertigen in Feinblech, S. 61 - 65 (Hg. Palkowski, H.). 5. Industriekolloquium SFB Fertigen in Feinblech. (2005)

Rasp, W.; Wichern, C. M.; Jamet, J.-M.: Improvement of Formability via Superimposed Hydrostatic Pressure. In: DFG Abschlusskolloquium Erweiterung der Formgebungsgrenzen bei Umformprozessen. Abschlusskolloquium zum DFG-Schwerpunkt 1074 "Erweiterung der Formgebungsgrenzen bei Umformprozessen", Aachen, Germany, 03. Mai 2005. Verlagshaus Mainz, Aachen, Germany (2005)

Rasp, W.; Yusupov, A.: Upper-Bound Model for Prediction of Spread and Side-Form Function in Hot Rolling and its Experimental Verification. XXIV. Verformungskundliches Kolloquium, Leoben, Austria, 26. Februar 2005 - 05. März 2005. Bericht XXIV. Verformungskundliche Kolloquium, S. 9 - 19 (2005)

Roters, F.; Jeon-Haurand, H. S.; Raabe, D.: A texture evolution study using the Texture Component Crystal Plasticity FEM. Dislocations, Plasticity, Damage and Metal Forming: Material Response and Multiscale Modeling, S. 397 - 399 (2005)

Roters, F.; Jeon-Haurand, H. S.; Raabe, D.: A Texture Evolution Study Using the Texture Component Crystal Plasticity FEM. In: Proceedings of ICOTOM 14, S. 937 - 944. ICOTOM 14, Trans Tech Publications, Switzerland\\par. Materials Science Forum, Switzerland\\par (2005)

Roters, F.; Ma, A.; Raabe, D.: A dislocation density based constitutive model for crystal plasticity FEM. Dislocations, Plasticity, Damage and Metal Forming: Material Response and Multiscale Modeling, S. 445 - 447 (2005)

Ruh, A.; Spiegel, M.: Salt melt induced etching phenomena on metal surfaces. Eurocorr 2005, Lisbon, Portugal, 04. September 2005 - 08. September 2005., (2005)

Savini, G.; Heggie, M. I.; Ewels, C. P.; Martsinovich, N.; Jones, R.; Blumenau, A. T.: Structure and energy of the 90 degrees partial dislocations in Wurtzite-GaN. Materials Science Forum 483, S. 1057 - 1060 (2005)

Spiegel, M.: Stability of CVD coatings in simulated biomass combustion environments. Eurocorr 2005, Lisbon, Portugal, 04. September 2005 - 08. September 2005., (2005)

Spiegel, M.; Parezanovic, I.: Selective Oxidation and Segregation during Annealing of Steels. 6th International Conference on the Microscopy of Oxidation, Birmingham, UK, 04. April 2005 - 06. April 2005. Mater. at High Temp., Proc. of Microscopy of Oxidation, (2005)

Stein, F.; Dovbenko, O. I.; Palm, M.: Experimental investigations of structure type variations of Laves phases. In: Proceedings International Conference: Modern Material Science: Achievements and Problems, S. 55 - 56. Modern Material Science MMS-2005, Kiev, Ukraine. Skorokhod, V. V., Kiev, Ukraine (2005)

Wichern, C. M.; Rasp, W.: Measuring and Quantifying the Surface-Roughness Anisotropy of Modelled and Industrial Produced Surfaces. Proc. 11th Int. Conf. on Sheet Metal, S. 573 - 580 (2005)

Wichern, C. M.; Rasp, W.: Improved Deformability of Intermetallic Materials by Superimposition of Hydrostatic Pressure. In: Proc. 8th ICTP (CD-ROM). 8th ICTP 2005: International Conference on Technology of Plasticity, Verona, Italy, 09. Oktober 2005 - 13. Oktober 2005. (2005)

Song, R.; Kaspar, R.; Ponge, D.; Raabe, D.: The effect of Mn on the microstructure and mechanical properties after heavy warm rolling of C-Mn steel. In: Ultrafine Grained Materials III, S. 445 - 450 (Hg. Zhu, Y. T.; Langdon, T. G.; Valiev, R. Z.). TMS, Charlotte, North Carolina, USA (2004)

Cha, S. C.; Spiegel, M.: Studies on the local reactions of thermophoretic deposited alkali chloride particles on metal surfaces. In: NACE CORROSION‘ 04, 04533. NACE CORROSION‘ 04, New Orleans, LA, USA. (2004)