Raabe, D.; Ohsaki, S.; Hono, K.: Mechanical alloying and amorphization in Cu–Nb–Ag in situ composite wires studied by transmission electron microscopy and atom probe tomography. Acta Materialia 57, S. 5254 - 5263 (2009)

Raabe, D.; Ponge, D.; Dmitrieva, O.; Sander, B.: Nano-precipitate hardened 1.5 GPa steels with unexpected high ductility. Scripta Materialia 60, S. 1141 - 1144 (2009)

Raabe, D.; Ponge, D.; Dmitrieva, O.; Sander, B.: Designing Ultrahigh Strength Steels with Good Ductility by Combining Transformation Induced Plasticity and Martensite Aging. Advanced Engineering Materials 11, S. 547 - 555 (2009)

Sandlöbes, S.: Untersuchungen zum Einsatz berührungsloser in-situ Messmethoden für die Analyse metallurgischer Gase. Berichte aus dem Institut für Eisenhüttenkunde 14 (2009)

Sato, H.; Zaefferer, S.: A study on the formation mechanisms of butterfly-type martensite in Fe–30% Ni alloy using EBSD-based orientation microscopy. Acta Materialia 57 (6), S. 1931 - 1937 (2009)

Sato, H.; Zaefferer, S.; Watanabe, Y.: In-situ Observation of Butterfly-type Martensite in Fe-30mass%Ni Alloy during Tensile Test Using High-resolution EBSD. ISIJ International 49, S. 1784 - 1791 (2009)

Schestakow, I.; Yi, S.; Zaefferer, S.: Twinning-related microstructural evolution during hot rolling and subsequent annealing of pure magnesium. Materials Science & Engineering A 516, S. 58 - 64 (2009)

Sun, D. K.; Zhu, M. F.; Pan, S. Y.; Raabe, D.: Numerical Modeling of dendritic growth in alloy solidification with forced convection. International Journal of Modern Physics B 23, S. 1609 - 1614 (2009)

Tasan, C. C.; Hoefnagels, J.P.M.; Geers, M.G.D.: A brittle-fracture methodology for three-dimensional visualization of ductile deformation micromechanisms. Scripta Materialia 61 (1), S. 20 - 23 (2009)

Tasan, C. C.; Hoefnagels, J.P.M.; Geers, M.G.D.: A critical assessment of indentation-based ductile damage quantification. Acta Materialia 57 (15), S. 4957 - 4966 (2009)

Tasan, C. C.; Hoefnagels, J.P.M.; ten Horn, C.H.L.J.; Geers, M.G.D.: Experimental analysis of strain path dependent ductile damage mechanics and forming limits. Mechanics of Materials 41 (11), S. 1264 - 1276 (2009)

Tasan, C. C.; Kaynak, C.: Mechanical performance of resol type phenolic resin/layered silicate nanocomposites. Polymer Composites 30 (3), S. 343 - 350 (2009)

Verbeken, K.; Barbé, L.; Raabe, D.: Evaluation of the Crystallographic Orientation Relationships between FCC and BCC phases in TRIP Steels. ISIJ International 49 (10), S. 1601 - 1609 (2009)

Verbeken, K.; van Caenegem, N.; Raabe, D.: Identification of ε-martensite in Fe-based shape memory alloy by means of EBSD. Micron 40, 1, S. 151 - 156 (2009)

Vervynckt, S.; Verbeken, K.; Thibaux, P.: Austenite Recrystallization–Precipitation Interaction in Niobium Microalloyed Steels. ISIJ International 49 (6), S. 911 - 920 (2009)

Weiland, H.; Nardiello, J.; Zaefferer, S.; Cheong, S.; Papazian, J.; Raabe, D.: Microstructural aspects of crack nucleation during cyclic loading of AA7075-T651. Engineering Fracture Mechanics 76, S. 709 - 714 (2009)

Wielant, J.; Posner, R.; Grundmeier, G.; Terryn, H.: Cathodic delamination of polyurethane films on oxide covered steel - Combined adhesion and interface electrochemical studies. Corros. Sci. 51 (8), S. 1664 - 1670 (2009)

Winning, M.; Brahme, A.; Raabe, D.: Prediction of cold rolling textures of steels using an artificial neural network. Computational Materials Science 46, S. 800 - 804 (2009)

Wu, G.; Zaefferer, S.: Advances in TEM orientation microscopy by combination of dark-field conical scanning and improved image matching. Ultramicroscopy 109, S. 1317 - 1325 (2009)

Zahn, D.; Tlatlik, H.; Raabe, D.: Modeling of dislocation patterns of small- and high-angle grain boundaries in aluminum. Computational Materials Science 46, S. 293 - 296 (2009)