Wissenschaftliche Publikationen

Yin, Y.; Prabhakar, J. M.; Ebbinghaus, P.; Corrêa da Silva, C.; Rohwerder, M.: Neutral inhibitor molecules entrapped into polypyrrole network for corrosion protection. Chemical Engineering Journal 440, 135739 (2022)

Cautaerts, N.; Crout, P.; Ånes, H. W.; Prestat, E.; Jeong, J.; Dehm, G.; Liebscher, C.: Free, flexible and fast: Orientation mapping using the multi-core and GPU-accelerated template matching capabilities in the Python-based open source 4D-STEM analysis toolbox Pyxem. Ultramicroscopy 237, 113517 (2022)

Khayatan, N.; Rohwerder, M.: A new insight into the rate determining step of cathodic delamination. Corrosion Science 202, 110311 (2022)

Guo, Y.; Jia, L.; He, J.; Zhang, S.; Li, Z.; Zhang, H.: Interplay between eutectic and dendritic growths dominated by Si content for Nb–Si–Ti alloys via rapid solidification. Journal of Manufacturing Science and Engineering, Transactions of the ASME 144 (6), 061007 (2022)

Ramachandramoorthy, R.; Kalácska, S.; Poras, G.; Schwiedrzik, J. J.; Edwards , T. E. J.; Maeder, X.; Merle, T.; Ercolano, G.; Koelmans, W. W.; Michler, J. K.: Anomalous high strain rate compressive behavior of additively manufactured copper micropillars. Applied Materials Today 27, 101415 (2022)

Hosseinabadi, R.; Riesch-Oppermann, H.; Best, J. P.; Dehm, G.; Kirchlechner, C.: Size scaling in bi-crystalline Cu micropillars containing a coherent twin boundary. Acta Materialia 230, 117841 (2022)

Yin, Y.; Zhao, H.; Prabhakar, J. M.; Rohwerder, M.: Organic composite coatings containing mesoporous silica particles: Degradation of the SiO₂ leading to self-healing of the delaminated interface. Corrosion Science 200, 110252 (2022)

Cantergiani, E.; Falkinger, G.; Mitsche, S.; Theissing, M.; Klitschke, S.; Roters, F.: Influence of Strain Rate Sensitivity on Cube Texture Evolution in Aluminium Alloys. Metallurgical and Materials Transactions A (2022)

Cantergiani, E.; Sauvage, X.; Scott, C.; Weck, A.: Rapid Strengthening of Interstitial Free Steel Using Amorphous FeC Thin Films and Induction Heating. Journal of Materials Engineering and Performance (2022)

Prabhakar, J. M.; Kerger, P.; de Vooys, A.; Rohwerder, M.: Migration of ions on oxygen-deficient chromium oxide electrodeposited from trivalent chromium electrolyte. Corrosion Science 199, 110185 (2022)

Mianroodi, J. R.; Shanthraj, P.; Liu, C.; Vakili, S.; Roongta, S.; Hamidi Siboni, N.; Perchikov , N.; Bai, Y.; Svendsen, B.; Roters, F. et al.; Raabe, D.; Diehl, M.: Modeling and simulation of microstructure in metallic systems based on multi-physics approaches. npj Computational Materials 8, 93 (2022)

Bishara, H.; Tsybenko, H.; Nandy, S.; Muhammad, Q. K.; Frömling, T.; Fang, X.; Best, J. P.; Dehm, G.: Dislocation-enhanced electrical conductivity in rutile TiO₂ accessed by room-temperature nanoindentation. Scripta Materialia 212, 114543 (2022)

Brinkmann , K. O.; Becker , T.; Zimmermann , E.; Kreusel, C.; Gahlmann , T.; Theisen, M.; Haeger , T.; Olthof, S.; Tückmantel, C.; Günster, M. et al.; Maschwitz, T.; Göbelsmann, F.; Koch , C.; Hertel , D.; Caprioglio , P.; Peña-Camargo, F.; Perdigón-Toro, L.; Al-Ashouri, A.; Merten , L.; Hinderhofer, A.; Gomell, L.; Zhang, S.; Schreiber , F.; Albrecht , S.; Meerholz, K.; Neher, D.; Stolterfoht, M.; Riedl , T.: Perovskite–organic tandem solar cells with indium oxide interconnect. Nature 604, S. 280 - 286 (2022)

Gierden, C.; Kochmann, J.; Waimann, J.; Svendsen, B.; Reese, S.: A Review of FE-FFT-Based Two-Scale Methods for Computational Modeling of Microstructure Evolution and Macroscopic Material Behavior. Archives of Computational Methods in Engineering (2022)

Joseph, S.; Kontis, P.; Chang, Y.; Shi, Y.; Raabe, D.; Gault, B.: A cracking oxygen story: A new view of stress corrosion cracking in titanium alloys. Acta Materialia 227, 117687 (2022)

Tsybenko, H.; Tian, C.; Rau, J.; Breitbach, B.; Schreiber, P.; Greiner, C.; Dehm, G.; Brinckmann, S.: Deformation and phase transformation in polycrystalline cementite (Fe₃C) during single- and multi-pass sliding wear. Acta Materialia 227, 117694 (2022)

An, W.; Utada, S.; Guo, X.; Antonov, S.; Zheng, W.; Cormier, J.; Feng, Q.: Thermal cycling creep properties of a directionally solidified superalloy DZ125. Journal of Materials Science & Technology 104, S. 269 - 284 (2022)

Aota, L. S.; Souza Filho, I. R.; Roscher, M.; Ponge, D.; Sandim, H. R. Z.: Strain hardening engineering via grain size control in laser powder-bed fusion. Materials Science and Engineering A: Structural Materials Properties Microstructure and Processing 838, 142773 (2022)

Souza Filho, I. R.; Springer, H.; Ma, Y.; Mahajan, A.; Corrêa da Silva, C.; Kulse, M.; Raabe, D.: Green steel at its crossroads: Hybrid hydrogen-based reduction of iron ores. Journal of Cleaner Production 340, 130805 (2022)

Chakraborty, J.; Oellers, T.; Raghavan, R.; Ludwig, A.; Dehm, G.: Microstructure and residual stress evolution in nanocrystalline Cu–Zr thin films. Journal of Alloys and Compounds 896, 162799 (2022)