Schneider, A.; Zhang, J.; Inden, G.: Metal dusting of binary Fe–Al alloys in CO–H₂–H₂O gas mixtures. The Conference on "Corrosion Science in the 21st Century", UMIST, University of Manchester Institute of Science and Technology, UK, 2003-07. Corrosion and Science Engineering 6 (87), pp. 1 - 20 (2004)

Shakhvorostov, D.; Pöhlmann, K.; Scherge, M.; Pinto, H.; Pyzalla, A.; Enders, S.: Mechanical properties of tribologically modified nanolayers. In: Tribology and Lubrication Engineering, pp. 59 - 62 (Ed. Bartz, W. J.). 14th International Colloquium Tribology, Technische Akademie Esslingen, January 13, 2004 - January 15, 2004. Technische Akademie Esslingen, Esslingen, Ostfildern (2004)

Uhlmann, E.; Frommeyer, G.; Herter, S.; Knippscheer, S.; Lischka, J. M.: Studies on the Conventional Machining of TiAl-Based Alloys. In: Ti-2003, 10th World Conference on Titanium, pp. 2293 - 2238 (Eds. Lütjering, G.; Albrecht, J.). Ti-2003, 10th World Conference on Titanium, Hamburg, Germany, 2004. Wiley-VCH, Weinheim (2004)

Varnik, F.; Bocquet, L.; Barrat, L.-J.: Stress fluctuations, static yield stress and shear banding in a flowing Lennard-Jones glass. SPIE Proceedings on Fluctuation and Noise in Materials 5469 (209), (2004)

Wichern, C. M.; Rasp, W.: Effects of idealized surface geometry on lubricant entrapment during plane-strain upsetting - An FEM study. In: Metal forming, pp. 355 - 359. 10th International conference on Metal forming. Steel Grips, Bad Harzburg, Germany (2004)

Zaefferer, S.; Chen, N.: The Goss texture formation in silicon steels: Growth selection or oriented nucleation? In: Proceedings of the 2nd International Conference on Texture and Anisotropy of Polycrystals (ITAP2). 2nd International Conference on Texture and Anisotropy of Polycrystals (ITAP2), Metz, France, July 07, 2004 - July 09, 2004. (2004)

Zhang, J.; Schneider, A.; Inden, G.: Metal dusting of iron in CO–H₂–H₂O gas mixtures at 600 °C. The Conference on "Corrosion Science in the 21st Century, UMIST, University of Manchester Institute of Science and Technology, UK, 2003-07. Corrosion and Science Engineering 6 (100), pp. 1 - 20 (2004)

Elsner, A.; Kaspar, R.: Deep-Drawable Steel Strip Produced by Ferritic Rolling. Materials Science Forum, pp. 1349 - 1354 (2003)

Storojeva, L.; Kaspar, R.; Ponge, D.: Ferritic-Pearlitic Steel with Deformation Induced Spheroidized Cementite. International Conference on Processing & Manufacturing of Advanced Materials, Leganes, Madrid, Spain, July 07, 2003 - July 11, 2003. Materials Science Forum, pp. 1169 - 1173 (2003)

Akiyama, E.; Hassel, A. W.; Stratmann, M.: A study of current transients caused by single particle impact on electrodes. In: Proceed. Asian Pacific Corr. Contr. Conf. 13, pp. C02 1 - C02 8. (2003)

Baumert, B.; Stratmann, M.; Rohwerder, M.: Formability of ultra-thin plasma polymer films deposited on metal sheet: Mesoscopic and nanoscopic aspects of defect formation. In: Thin Films-Stresses and Mechanical Properties X, Vol. 795, pp. 257 - 262 (Eds. Corcoran, S. G.; Joo, Y. C.; Moody, N. R.; Suo, Z.). Symposium on Thin Films - Stresses and Mechanical Properties X held at the 2003 MRS Fall Meeting, Boston, MA, USA, December 01, 2003 - December 05, 2003. (2003)

Brüx, U.; Frommeyer, G.: High-Strength Light-Weight Steels based on Fe–Mn–Al–C Microstructures - Mechanical Properties. In: Dislocations, Plasticity and Metal Forming, pp. 169 - 171 (Ed. Khan, A.S.). Plasticity 2003, Québec, Canada, 2003. Neat Press, Fulton, MD, USA (2003)

Filatov, D.; Pawelski, O.; Rasp, W.: Laboratory Tests on Brittle-Ductile Behaviour of Scale in the Roll Gap during Hot Rolling. In: Proc. 3rd European Rolling Conf. (METEC Congress 03), pp. 103 - 108. (2003)

Frommeyer, G.; Rablbauer, R.: High temperature resistant intermetallic Ni-Al-based alloys with refractory metals Cr, Mo, Re. In: Mat. Res. Soc. Symp. Proc., pp. 193 - 207. 2002 MRS Fall Meeting, Boston, MA, USA, December 02, 2002 - December 06, 2002. (2003)

Fushimi, K.; Hassel, A. W.; Stratmann, M.: Passive Film Formed on Shape Memory NiTi-Alloy in Sulfuric Acid. In: Proceed. Asian Pacific Corr. Contr. Conf. 13, pp. L06 1 - L06 8. (2003)

Hassel, W.; Bonk, S.; Wicinski, M.; Stratmann, M.: Corrosion of zinc coated steel sheets under cyclic corrosion conditions. Asian Pacific Corr. Contr. Conf. 13. Proceed. Asian Pacific CoRR. Contr. Conf. 13, pp. P03 1 - P03 6 (2003)

Inden, G.; Hutchinson, C. R.: Interfacial conditions at the moving interface during growth of ferrite from austenite in Fe-C-(X) alloys. In: Proceedings of the Symposium on the Thermodynamics, Kinetics, Characterization and Modelling of Austenite Formation and Decomposition (Eds. Damm, E. B.; Erwin, M. J.). TMS Warrandale, Warrandale (2003)

Kuo, J. C.; Raabe, D.; Zaefferer, S.; Roters, F.; Zhao, Z.; Winning, M.: Characterizing the Grain boundary Effect in Bicrystal Deformation. Dislocations, Plasticity and Metal Forming, pp. 543 - 545 (2003)

Li, Y. S.; Spiegel, M.: Degradation performance of Al-containing alloys and intermetallics by molten ZnCl₂/KCl. In: Corrosion Science in the 21th Century, 1. UMIST, Manchester, UK (2003)

Parezanovic, I.; Spiegel, M.: Influence of dew point on the selective oxidation of cold rolled DP and IF-steels. In: Corrosion Science in the 21th Century, 1. UMIST, Manchester, UK (2003)