Scientific Publications

Giza, G.; Fink, N.; Grundmeier, G.: Electrochemical studies of the inhibition of the cathodic delamination of organically coated galvanised steel by thin conversion films. Electrochimica Acta 53 (3), pp. 1290 - 1299 (2007)

Rohwerder, M.; Michalik, A.: Conducting polymers for corrosion protection: What makes the difference between failure and success? Electrochimica Acta 53 (3 SPEC. ISS.), pp. 1301 - 1314 (2007)

Plagge, A.; Adler, H. J. P.; Jaehne, E.; Paliwoda-Porebska, G.; Rohwerder, M.; Stratmann, M.; Eichhorn, K. J.: Single and double polymer layer arrangements of acid groups containing cellulose and basic groups containing polyethyleneimine on steel. Macromolecular Materials and Engineering 292 (12), pp. 1245 - 1255 (2007)

Rohwerder, M.; Turcu, E. F.: High-resolution Kelvin probe microscopy in corrosion science: Scanning Kelvin probe force microscopy (SKPFM) versus classical scanning Kelvin probe (SKP). Electrochimica Acta 53 (2), pp. 290 - 299 (2007)

Albrecht, M.; Abu-Farsakh, H.; Remmele, T.; Geelhaar, L.; Riechert, H.; Neugebauer, J.: Compositional Correlation and Anticorrelation in Quaternary Alloys: Competition Between Bulk Thermodynamics and Surface Kinetics. Physical Review Letters 99 (20), 206103 (2007)

Sob, M.; Friák, M.; Wang, L. G.; Kuriplach, J.: The role of ab initio electronic structure calculations in contemporary materials science - part 2. Journal of Functional Materials 1 (11), pp. 408 - 418 (2007)

Boßelmann, F.; Romano, P.; Fabritius, H.; Raabe, D.: The composition of the exoskeleton of two crustacea: The American lobster Homarus americanus and the edible crab Cancer pagurus. Thermochimica Acta 463 (1-2), pp. 65 - 68 (2007)

Sob, M.; Friák, M.; Wang, L. G.; Kuriplach, J.: The role of ab initio electronic structure calculations in contemporary materials science - part 1. Journal of Functional Materials 1 (10), pp. 363 - 367 (2007)

de la Fuente, D.; Böhm, M. C.; Houyoux, C.; Morcillo, M.; Rohwerder, M.: Methods for salt contamination of steel corrosion products: A characterization study. Materials and Corrosion-Werkstoffe und Korrosion 58 (10), pp. 781 - 788 (2007)

Asteman, H.; Spiegel, M.: Investigation of the HCl (g) attack on pre-oxidized pure Fe, Cr, Ni and commercial 304 steel at 400 °C. Corrosion Science 49 (9), pp. 3626 - 3637 (2007)

Godara, A.; Raabe, D.: Influence of fiber orientation on global mechanical behavior and mesoscale strain localization in a short glass-fiber-reinforced epoxy polymer composite during tensile deformation investigated using digital image correlation. Composites Science and Technology 67 (11-12), pp. 2417 - 2427 (2007)

Stempniewicz, M.; Khalil, A. S. G.; Rohwerder, M.; Marlow, F.: Diffusion in coiled pores - Learning from microrelease and microsurgery. Journal of the American Chemical Society 129 (34), pp. 10561 - 10566 (2007)

Raabe, D.; Ma, D.; Roters, F.: Effects of initial orientation, sample geometry and friction on anisotropy and crystallographic orientation changes in single crystal microcompression deformation: A crystal plasticity finite element study. Acta Materialia 55 (13), pp. 4567 - 4583 (2007)

Raabe, D.; Sander, B.; Friák, M.; Ma, D.; Neugebauer, J.: Theory-guided bottom-up design of β-titanium alloys as biomaterials based on first principles calculations: Theory and experiments. Acta Materialia 55 (13), pp. 4475 - 4487 (2007)

Grabowski, B.; Hickel, T.; Neugebauer, J.: Ab initio study of the thermodynamic properties of nonmagnetic elementary fcc metals: Exchange-correlation-related error bars and chemical trends. Physical Review B 76 (2), 024309 (2007)

Soon, A.; Wong, L.; Lee, M.; Todorova, M.; Delley, B.; Stampfl, C.: Nitrogen adsorption and thin surface nitrides on Cu(111) from first-principles. Surface Science 601, pp. 4775 - 4785 (2007)

Krein, R.; Palm, M.: Twofold yield stress anomaly in L2₁-ordered Fe–Al–Ti alloys. Materials Science and Engineering A: Structural Materials Properties Microstructure and Processing 460-461, pp. 174 - 179 (2007)

Han, C. S.; Nikolov, S.: Indentation size effects in polymers and related rotation gradients. Journal of Materials Research 22, pp. 1662 - 1672 (2007)

Lins, J. F. C.; Sandim, H. R. Z.; Kestenbach, H. J.; Raabe, D.; Vecchio, K. S.: A microstructural investigation of adiabatic shear bands in an interstitial free steel. Materials Science and Engineering A 457 (1-2), pp. 205 - 218 (2007)

Romano, P.; Fabritius, H.; Raabe, D.: The exoskeleton of the lobster Homarus americanus as an example of a smart anisotropic biological material. Acta Biomaterialia 3 (3), pp. 301 - 309 (2007)