Cha, S. C.; Spiegel, M.: Local reaction between NaCl and KCl particles and metal surfaces. In: Proceedings of EUROCORR '04, 1. Proceedings of EUROCORR '04, Nice, France, 2004. (2004)

Dorner, D.; Lahn, L.; Zaefferer, S.: Investigation of the primary recrystallization microstructure of cold rolled and annealed Fe 3% Si single crystals with Goss orientation. Material Science Forum, pp. 129 - 134 (2004)

Elsner, A.; Kaspar, R.; Ponge, D.; Raabe, D.; van der Zwaag, S.: Recrystallization Texture of Cold Rolled and Annealed IF Steel Produced from Ferritic Rolled Hot Strip. Materials Science Forum, pp. 257 - 262 (2004)

Frenznick, S.; Stratmann, M.; Rohwerder, M.: Galvanizing of Defined Model Samples: On the Road to a Fundamental Physical Understanding of Hot-Dip Galvanizing. In: Galvatech '04: 6th International Conference on Zinc and Zinc Alloy Coated Steel Sheet - Conferece Proceedings, pp. 411 - 417. GALVATECH 2004, 6th International Conference on Zinc and Zinc Alloy Coated Sheet Steels., Chicago, USA, April 04, 2004 - April 07, 2004. The Association for Iron & Steel Technology (AIST) (2004)

Frommeyer, G.: Superplasticity at Higher Strain Rates in Ultrafine Grained α-Titanium / Ti_xMe_y-Intermetallic Ti-8Fe-4Al, Ti-10Co-4Al and Ti-10Ni-4Al alloys. In: Third European Conference on Super Plastic Forming, pp. 57 - 64 (Eds. Bernhart, G.; Cutard, T.; Lours, P.). Third European Conference on Super Plastic Forming (EURO SPF 2004), Albi, France. Cépaduès-Éditions, Toulouse, France (2004)

Frommeyer, G.; Knippscheer, S.: Enhanced Superplasticity of Fine-Grained Gamma TiAl(Mo, Cr, Si) Alloys. In: Ti-2003 Science and Technology, pp. 2249 - 2256 (Eds. Lütjering, G.; Albrecht, J.). Ti-2003, 10th World Conference on Titanium, Hamburg, Germany. Wiley-VCH, Weinheim (2004)

Frommeyer, G.; Rosenkranz, R.: Structures and Properties of the Refractory Silicides Ti₅Si₃ and TiSi₂ and Ti-Si-(Al) Eutectic Alloys. In: Nato Science Series II. Mathematics, Physics and Chemistry (2004), pp. 287 - 308 (Eds. Senkov, O.N.; Miracle Firstov S.A., D.B.). NATO Advanced Research Workshop on Metallic Materials with High Structural Efficiency, Kyiv, Ukraine, September 07, 2003 - September 13, 2003. Kluver Academic Publishers, Dordrecht (2004)

Heikinheimo, L.; Hack, K.; Baxter, D.; Spiegel, M.; Krupp, U.; Hamalainen, M.; Arponen, M.: Optimisation of in-service performance of boiler steels by modelling high temperature corrosion – EU FP5OPTICORR project. Materials Science Forum: High Temperature Corrosion and Protection of Materials 6 (1 and 2), pp. 461; 473 - 464; 480 (2004)

Knippscheer, S.; Frommeyer, G.: Effects of Ternary Alloying Elements on Constitution and Mechanical Properties of TiAl Base Alloy. In: Ti-2003 Science and Technology, pp. 2231 - 2238 (Eds. Lütjering, G.; Albrecht, J.). Ti-2003, 10th World Conference on Titanium, Hambur, Germany. Wiley-VCH, Weinheim (2004)

Kobayashi, S.; Zaefferer, S.; Schneider, A.; Raabe, D.; Frommeyer, G.: Effect of the Degree of Order and the Deformation Microstructure on the Kinetics of Recrystallization in a Fe₃Al Ordered Alloy. Materials Science Forum, pp. 153 - 158 (2004)

Ma, A.; Roters, F.; Raabe, D.: Experiments and Simulations on the micromechanics of single- and polycrystalline metals. Numiform 2004, The Ohio State University, Columbus, Ohio, U.S.A., June 13, 2004 - June 17, 2004. Materials Processing and Design: Modeling, Simulation and Applications, pp. 78 - 83 (2004)

Parezanovic, I.; Spiegel, M.: Influence of dew point on the selective oxidation of cold rolled DP and IF-steels. In: Proceedings of GALVATECH, pp. 401 - 409. GALVATECH, Chicago, USA. (2004)

Park, E.; Hüning, B.; Spiegel, M.: Effects of heat treatment on the oxide layer of Fe–15 at.% Cr alloy surface. Proceedings of EUROCORR 04, Nice, France, 2004. Long Term Prediction and Modelling of Corrosion 1, (2004)

Pöter, B.; Stein, F.; Palm, M.; Spiegel, M.: Oxidation behaviour of Fe–Al alloys analysed using in- and ex-situ techniques. In: Proceedings of EUROCORR`04, 1. EUROCORR`04, Nice, France, 2004. (2004)

Prakash, U.; Sauthoff, G.; Parvathavarthini, N.; Dayal, R. K.: Hydrogen Effects in Iron Aluminides Containing Carbon. Inorganic Materials: recent Advances, pp. 148 - 152 (2004)

Raabe, D.: Simulation of Spherulite Growth during Polymer Crystallization by use of a Cellular Automaton. Materials Science Forum, pp. 603 - 609 (2004)

Raabe, D.; Chen, N.: Recrystallization in Deformed and Heat Treated PET Polymer Sheets. Materials Science Forum, pp. 551 - 556 (2004)

Rohwerder, M.; Hausbrand, R.; Stratmann, M.: Development of Zinc-Alloy Coatings with Inherent Delamination Stability for Organic Coatings. In: Galvatech '04: 6th International Conference on Zinc and Zinc Alloy Coated Steel Sheet - Conference Proceedings., pp. 971 - 976. Galvatech '04: 6th International Conference on Zinc and Zinc Alloy Coated Steel Sheet - Code 66811, Chicago, IL, USA, April 04, 2004 - April 07, 2004. The Association for Iron & Steel Technology (AIST) (2004)

Roters, F.; Ma, A.; Raabe, D.: Kristallplastische Simulation in der Werkstoffprüfung. In: Proceedings of the 2004- Materials-Testing Conference of DGM in Neu-Ulm. DGM-Verlag (2004)

Ruh, A.; Spiegel, M.: Influence of HCl and water vapour on the corrosion kinetics of Fe beneath molten ZnCl₂/KCl. In: Proceedings of EUROCORR 04, 1. Proceedings of EUROCORR 04, Nice, France, 2004. (2004)