Scientific Publications

Cantergiani, E.; Falkinger, G.; Roters, F.: Crystal plasticity simulations of Cube in-grain fragmentation in aluminium: Influence of crystal neighbor orientation. International Journal of Solids and Structures 252, 111801 (2022)

Saksena, A.; Kubacka, D.; Gault, B.; Spieker, E.; Kontis, P.: The effect of γ matrix channel width on the compositional evolution in a multi-component nickel-based superalloy. Scripta Materialia 219, 114853 (2022)

Yin, Y.; Prabhakar, J. M.; Ebbinghaus, P.; Corrêa da Silva, C.; Rohwerder, M.: Neutral inhibitor molecules entrapped into polypyrrole network for corrosion protection. Chemical Engineering Journal 440, 135739 (2022)

Cautaerts, N.; Crout, P.; Ånes, H. W.; Prestat, E.; Jeong, J.; Dehm, G.; Liebscher, C.: Free, flexible and fast: Orientation mapping using the multi-core and GPU-accelerated template matching capabilities in the Python-based open source 4D-STEM analysis toolbox Pyxem. Ultramicroscopy 237, 113517 (2022)

Khayatan, N.; Rohwerder, M.: A new insight into the rate determining step of cathodic delamination. Corrosion Science 202, 110311 (2022)

Körber, S.; Wolff-Goodrich, S.; Völkl, R.; Glatzel, U.: Effect of Wall Thickness and Surface Conditions on Creep Behavior of a Single-Crystal Ni-Based Superalloy. Metals 12 (7), 1081 (2022)

Ledendecker, M.; Paciok, P.; Osowiecki, W. T.; Pander, M.; Heggen, M.; Göhl, D.; Kamat, G. A.; Erbe, A.; Mayrhofer, K. J. J.; Alivisatos, A. P.: Engineering gold-platinum core-shell nanoparticles by self-limitation in solution. Communications Chemistry 5 (1), 71 (2022)

Guo, Y.; Jia, L.; He, J.; Zhang, S.; Li, Z.; Zhang, H.: Interplay between eutectic and dendritic growths dominated by Si content for Nb–Si–Ti alloys via rapid solidification. Journal of Manufacturing Science and Engineering, Transactions of the ASME 144 (6), 061007 (2022)

Ramachandramoorthy, R.; Kalácska, S.; Poras, G.; Schwiedrzik, J. J.; Edwards , T. E. J.; Maeder, X.; Merle, T.; Ercolano, G.; Koelmans, W. W.; Michler, J. K.: Anomalous high strain rate compressive behavior of additively manufactured copper micropillars. Applied Materials Today 27, 101415 (2022)

Dsouza, R.; Huber, L.; Grabowski, B.; Neugebauer, J.: Approximating the impact of nuclear quantum effects on thermodynamic properties of crystalline solids by temperature remapping. Physical Review B 105 (18), 184111 (2022)

Godor, F.; Palm, M.; Liebscher, C.; Stein, F.; Turk, C.; Leitner, K.; Rashkova, B.: Microstructure Evolution of a New Precipitation-Strengthened Fe–Al–Ni–Ti Alloy down to Atomic Scale. Metals 12 (6), 906 (2022)

Ma, Y.; Souza Filho, I. R.; Bai, Y.; Schenk, J.; Patisson, F.; Beck, A.; van Bokhoven, J. A.; Willinger, M. G.; Li, K.; Xie, D. et al.; Ponge, D.; Zaefferer, S.; Gault, B.; Mianroodi, J. R.; Raabe, D.: Hierarchical nature of hydrogen-based direct reduction of iron oxides. Scripta Materialia 213, 114571 (2022)

Hosseinabadi, R.; Riesch-Oppermann, H.; Best, J. P.; Dehm, G.; Kirchlechner, C.: Size scaling in bi-crystalline Cu micropillars containing a coherent twin boundary. Acta Materialia 230, 117841 (2022)

Yin, Y.; Zhao, H.; Prabhakar, J. M.; Rohwerder, M.: Organic composite coatings containing mesoporous silica particles: Degradation of the SiO₂ leading to self-healing of the delaminated interface. Corrosion Science 200, 110252 (2022)

Cantergiani, E.; Falkinger, G.; Mitsche, S.; Theissing, M.; Klitschke, S.; Roters, F.: Influence of Strain Rate Sensitivity on Cube Texture Evolution in Aluminium Alloys. Metallurgical and Materials Transactions A (2022)

Cantergiani, E.; Sauvage, X.; Scott, C.; Weck, A.: Rapid Strengthening of Interstitial Free Steel Using Amorphous FeC Thin Films and Induction Heating. Journal of Materials Engineering and Performance (2022)

Hiremath, P.; Melin, S.; Bitzek, E.; Olsson, P. A. T.: Effects of interatomic potential on fracture behaviour in single- and bicrystalline tungsten. Computational Materials Science 207 (18), 111283 (2022)

Prabhakar, J. M.; Kerger, P.; de Vooys, A.; Rohwerder, M.: Migration of ions on oxygen-deficient chromium oxide electrodeposited from trivalent chromium electrolyte. Corrosion Science 199, 110185 (2022)

Mianroodi, J. R.; Shanthraj, P.; Liu, C.; Vakili, S.; Roongta, S.; Hamidi Siboni, N.; Perchikov , N.; Bai, Y.; Svendsen, B.; Roters, F. et al.; Raabe, D.; Diehl, M.: Modeling and simulation of microstructure in metallic systems based on multi-physics approaches. npj Computational Materials 8, 93 (2022)

Changizi, R.; Zaefferer, S.; Abdellaoui, L.; Scheu, C.: Effects of Defect Density on Optical Properties Using Correlative Cathodoluminescence and Transmission Electron Microscopy Measurements on Identical PrNbO₄ Particles. ACS Applied Electronic Materials 4 (4), pp. 2095 - 2100 (2022)