Schwind, B.; Fabritius, H.-O.; Wu, X.: Structural design for broadband light management in a biological example. 2019 Conference on Lasers and Electro-Optics Europe and European Quantum Electronics Conference, CLEO/Europe-EQEC 2019, Munich, Germany, June 23, 2019 - June 27, 2019. 2019 Conference on Lasers and Electro-Optics Europe and European Quantum Electronics Conference, CLEO/Europe-EQEC 2019 8872263, (2019)

Distl, B.; Palm, M.; Stein, F.; Rackel, M. W.; Hauschildt, K.; Pyczak, F.: Phase equilibria investigations in the ternary Ti–Al–Nb system at elevated temperatures. In: Proceedings Intermetallics, pp. 170 - 171. Intermetallics, Bad Staffelstein, Germany, September 30, 2019 - October 04, 2019. (2019)

Djinović, P.; Zavašnik, J.; Jerman, I.; Sest, E.; Žerjav, G.: The role of activated carbon supported CeOx and Vox phases during oxidative dehydrogenation of propane to propylene using CO₂ as a soft oxidant. 12th Natural Gas Conversion Symposium 2019, San Antonio, TX, USA, June 02, 2019 - June 06, 2019. 12th Natural Gas Conversion Symposium 2019, pp. 532 - 535 (2019)

Fan, H.; El-Awady, J. A.: Hardening Effects of Precipitates with Different Shapes on the Twinning in Magnesium Alloys. Magnesium Technology Symposium held at the TMS Annual Meeting and Exhibition, San Antonio, TX, USA, March 10, 2019 - March 14, 2019. Minerals, Metals and Materials Series, pp. 257 - 261 (2019)

Gedsun, A.; Palm, M.: Development of Fe–Al–Nb(–B) alloys for high-temperature applications. In: Proceedings Intermetallics, pp. 208 - 209. Intermetallics, Bad Staffelstein, Germany, September 30, 2019 - October 04, 2019. (2019)

Horiuchi, T.; Yamada, K.; Ikeda, K.; Miura, S.; Stein, F.: Deformation behavior of Nb₂Co₇ as a promising candidate for a crystal-structure-dependent mille-feuille structured material. In: Proceedings Intermetallics, pp. 135 - 166. Intermetallics, Bad Staffelstein, Germany, September 30, 2019 - October 04, 2019. (2019)

Kahrobaee, Z.; Stein, F.; Palm, M.: Experimental evaluation of the isothermal section of the Ti–Al–Zr ternary system at 1273 K. In: Proceedings Intermetallics, pp. 174 - 175. Intermetallics 2019, Bad Staffelstein, Germany, September 30, 2019 - October 04, 2019. (2019)

Langille, M.; Diak, B. J.; De Geuser, F.; Guiglionda, G.; Meddeb, S.; Zhao, H.; Gault, B.; Raabe, D.; Deschamps, A.: Understanding the Role of Cu and Clustering on Strain Hardening and Strain Rate Sensitivity of Al–Mg–Si–Cu Alloys. In: The Minerals, Metals & Materials Series (MMMS), pp. 143 - 151 (Ed. Chesonis, C.). Springer, Cham (2019)

Liu, Y.; Yue, S.; Su, J.; Javaid, A.; Skszek, T.: The precipitation behavior and texture modification of rolled micro-alloyed magnesium alloy. 30th ASM Heat Treating Society Conference and Exposition, Heat Treat 2019, Detroit, MI, USA, October 15, 2019 - October 17, 2019. 30th ASM Heat Treating Society Conference and Exposition, Heat Treat 2019 - Extended Abstracts 1, pp. 67 - 72 (2019)

Luo, W.; Kirchlechner, C.; Dehm, G.; Stein, F.: Micromechanics of Co–Nb Laves Phases: Strength, Fracture Toughness, and Hadrness as Function of Composition and Crystal Structure. In: Joint EPRI – 123HIMAT International Conference on Advances in High-Temperature Materials, 2019, pp. 11 - 21 (Eds. Shingledecker, J.; Takeyama, M.). EPRI's 9th International Conf on Advances in Materials Technology for Fossil Power Plants and the 2nd International 123HiMAT Conf on High-Temperature Materials, Nagasaki, Japan, October 21, 2019 - October 24, 2019. (2019)

Rezaei, S.; Mianroodi, J. R.; Brepols, T.; Wulfinghoff, S.; Reese, S.: An interface model to account for damage and plasticity at grain boundaries. Proceedings of Applied Mathematics and Mechanics, Special Issue: 90th Annual Meeting of the International Association of Applied Mathematics and Mechanics (GAMM) 19 (1), e201900214, (2019)

Schwind, B.; Fabritius, H.-O.; Wu, X.: Structural design for broadband light management in a biological example. The European Conference on Lasers and Electro-Optics, CLEO_Europe_2019, Munich, Germany, June 23, 2019 - June 27, 2019. Optics InfoBase Conference Papers 2019-ck_p_43, (2019)

Stein, F.; Merali, M.; Watermeyer, P.: Phase relations between fcc-Co, L1₂ TiCo₃, and the two coexisting Laves phases C36 and C15 TiCo₂. In: Proceedings Intermetallics 2019, pp. 55 - 56. Intermetallics, Bad Staffelstein, Germany, September 30, 2019 - October 04, 2019. (2019)

Teržan, J.; Djinović, P.; Zavašnik, J.; Arčon, I.; Žerjav, G.; Spreitzer, M.; Pintar, A.: Origin of selectivity in the direct propylene epoxidation reaction using molecular oxygen. 12th Natural Gas Conversion Symposium 2019, San Antonio, TX, USA, June 02, 2019 - June 06, 2019. 12th Natural Gas Conversion Symposium 2019, pp. 404 - 407 (2019)

Tran, T. H.; Gerlitzky, C.; Rohwerder, M.; Groche, P.: Which properties must a surface have to be suitable for cold pressure welding? 22nd International Conference on Material Forming (ESAFORM 2019), Mondragon Unibrtsitatae, Spain, May 08, 2019 - May 10, 2019. AIP Conference Proceedings 2113, 050019, (2019)

Yamada, K.; Horiuchi, T.; Miura, S.; Stein, F.: Precipitation behavior of Nb₂Co₇ from Nb-supersaturated Co-solid solution in Co-rich Co–Nb binary alloys. In: Proceedings Intermetallics, pp. 210 - 211. Intermetallics 2019, Bad Staffelstein, Germany, September 30, 2019 - October 04, 2019. (2019)

Zavašnik, J.; Peng, J.; Palm, M.: TEM Analysis of the oxidation scale grown on iron aluminides. In: Proc. 27. International Conference on Materials and Technology, p. 185. 27. International Conference on Materials and Technology (27. ICM&T) , Portorož, Slovenia, October 16, 2019 - October 18, 2019. (2019)

Zavašnik, J.; Peng, J.; Palm, M.: Pre-oxidation of iron aluminides. In: Proceedings Intermetallics, pp. 70 - 71. Intermetallics 2019, Bad Staffelstein, Germany, September 30, 2019 - October 04, 2019. (2019)

Massey, C. P.; Hoelzer, D. T.; Edmondson, P. D.; Seibert, R. L.; Kini, A.; Gault, B.; Terrani, K. A.; Zinkle, S. J.: OFrac: An advanced nanostructured ferritic alloy fuel cladding for fast reactors. AISTech 2018 Iron and Steel Technology Conference and Exposition, Pennsylvania Convention Center, Philadelphia, PA, USA, May 07, 2018 - May 10, 2018. AISTech - Iron and Steel Technology Conference Proceedings 2018-May, pp. 1433 - 1435 (2018)

Abdelmawla, A.; Hatem, T. M.; Ghoniem, N. M.: Dislocation-based finite element modelling of hydrogen embrittlement in steel alloys. In: Minerals, Metals and Materials Series, Vol. Part F12, pp. 213 - 223. 147th Annual Meeting and Exhibition of the Minerals, Metals and Materials Society, TMS 2018, Phoenix, AZ, USA, March 11, 2018 - March 15, 2018. Springer International Publishing (2018)