Pfeifer, R.; Wang, L. W.; Blumenstock, T.; Eyerer, P.: High-pressure slip casting of Si₃N₄ using porous polystyrene molds. In: Proceedings of ESAFORM 2000, 3rd Esaform Conference on Materials Forming, pp. II-31 - III-34 (Ed. Fritz, G. H.). IKT Universität Stuttgart, Stuttgart (2000)

Seeger, A.: Foreword to Special Functions, A Unified Theory Based on Singularities. In: Special Functions, A Unified Theory Based on Singularities, pp. V - VII. Oxford University Press, Oxford, UK (2000)

Seitz, J.; Clauß, B.; Schuhmacher, J.; Müller, K.; Canel, J.; Thurn, G.; Bill, J.; Aldinger, F.: Struktur- und Funktionskeramiken aus neuartigen Precursoren im System Si/B/C/N. In: Forschungsergebnisse / Keramikverbund Karlsruhe-Stuttgart (01.01.1996 - 31.12.1998), p. 29 (Ed. Aldinger, F.). Deutsche Keramische Gesellschaft, Köln (2000)

Stoll, H.: Age-momentum correlation (AMOC). In: Construction and Use of an Intense Positron Source at new Linac Facilities in Germany, pp. 44 - 49 (Eds. Brauer, G.; Forschungszentrum Rossendorf) (2000)

Stoll, H.: MeV Positron Beams. In: Positron Beams and Their Applications, pp. 237 - 257 (Ed. Coleman, P. G.). World Scientific, Singapore (2000)

Thurn, G.; Bauer, A.; Canel, J.; Christ, M.; Aldinger, F.: Herstellung und mechanische Hochtemperatureigenschaften von Si-(B-)C-N Precursorkeramiken. In: Technische Keramische Werkstoffe, Ergänzungslieferung Februar 2000, pp. 1 - 21 (Ed. Kriegesmann, J.). Fachverlag Deutscher Wirtschaftsdienst, Köln (2000)

Trenkler, J.; Moss, S. C.; Reichert, H.; Paniago, R.; Gebhardt, U.; Carstanjen, H. D.; Metzger, T. H.; Peisl, J.: Critical behaviour of V₂H in a defective near-surface skin layer. In: Exploration of Subsurface Phenomena by Particle Scattering, pp. 155 - 164 (Eds. Lam; Q., N.; Melendres; A., C.; Sinha et al.). International Advanced Studies Institute IASI Press, North East/MD (2000)

Vogel, M.; Kraft, O.; Arzt, E.; Reese, E. D.; Rauh, R.: Creep of Mg-Zn-Al alloys. In: Magnesium Alloys and their Application, pp. 693 - 700 (Ed. Kainer, K. U.). Wiley-VCH, Weinheim (2000)

Voskamp, A. P.; Mittemeijer, E. J.: Residual-stress development and texture formation during rolling contact loading. In: Industrial Applications of X-ray Diffraction, pp. 813 - 846 (Eds. Chung, F. H.; Smith, D. K.). Marcel Dekker, New York (2000)

Wanner, A.; Dunand, D. C.: Synchrotron X-ray study of elastic phase strains in the bulk of an externally loaded Cu/Mo composite. In: Applications of Synchrotron Radiation Techniques to Material Science, pp. 157 - 162 (Eds. Stock, S. R.; Perry, D. L.; Mini, S. M.). Materials Research Society, Warrendale/PA (2000)

Zabel, H.; Stierle, A.; Hellwig, O.; Koll, T.: In-situ X-ray studies of oxide formation on epitaxial metal films. In: Exploration of Subsurface Phenomena by Particle Scattering, pp. 103 - 118 (Eds. Lam, N. Q.; Melendres, C. A.; Sinha, S. K.). International Advanced Studies Institute IASI Press, North East/MD (2000)

Böttger, A. J.; Delhez, R.; Mittemeijer, E. J. (Eds.): Proceedings of the 5th European Conference on Residual Stresses (ECRS-5) (Materials Science Forum, 347-349). 5th European Conference on Residual Stesses (ECRS-5), Delft-Noordwijkerhout, The Netherlands, September 29, 1999 - September 30, 1999. Trans. Tech. Publ., Zürich-Uetikon/Switzerland (2000), 740 pp.

Delhez, R.; Mittemeijer, E. J. (Eds.): Proceedings of the 6th European Powder Diffraction Conference (EPDIC 6) (Materials Science Forum, 321-324). Proceedings of the Sixth European Powder Diffraction Conference (EPDIC 6), Budapest, Hungary, 1998-08. Trans. Tech. Publ., Zürich-Uetikon/Switzerland (2000), 1232 p pp.

Brabers, V. A. M.; Brabers, J. H. V. J.; Walz, F.; Kronmüller, H.: Experimental and theoretical study of the Verwey transition in magnetite. In: Proceedings 8th International Conference on Ferrites, pp. 123 - 125 (Eds. Abe, M.; Yamazaki, Y.). Japan Society of Powder and Powder Metallurgy, Kyoto (2000)

Dehm, G.; Arzt, E.: In-situ TEM study of thermal-stress induced dislocations in a Cu thin film on a SiN_x coated Si-substracte. In: Proceedings of the 12th European Congress on Electron Microscopy. Vol. 2: Physical Sciences, pp. 523 - 524 (Eds. Gemperlova, J.; Vavra, I.). 12th European Congress on Electron Microscopy (EUREM2000), Brno [Czech Republic], July 09, 2000 - July 14, 2000. Czechoslovak Society for Electron Microscopy (2000)

Du, K.; Jin-Phillipp, N. Y.; Phillipp, F.: Influence of experimental parameters on the accuracy of lattice-distortion measurements directly from high-resolution micrographs. In: Proceedings of the 12th European Congress on Electron Microscopy. Vol. 3, pp. 137 - 138 (Eds. Ciampor, P.; Frank, L.; Tomanek, P.; Kolarik, R.). 12th European Congress on Electron Microscopy (EUREM2000), Brno [Czech Republic], July 09, 2000 - July 14, 2000. Czechoslovak Society for Electron Microscopy, Brno (2000)

Eberl, K.; Schmidt, O. G.; Kienzle, O.; Ernst, F.: Preparation and optical properties of Ge and C-induced Ge dots on Si. In: Semiconductor Quantum Dots, pp. 355 - 362 (Ed. Moss, S.C.). Semiconductor Quantum Dots. Symposium, San Francisco, Calif., U.S.A., April 05, 1999 - April 08, 1999. MRS, Warrendale, Pa. (2000)

Flaig, A.; Wang, H.; Wanner, A.; Arzt, E.: Cyclic creep of a short-fiber reinforced aluminum alloy. In: EUROMAT 99. Vol. 5, pp. 196 - 201. EUROMAT 99. 6th European Congress on Advanced Materials and Processes, München, September 27, 1999 - September 30, 1999. Wiley-VCH, Weinheim [u.a.] (2000)

Frank, W.; Blüher, R.; Schmich, I.: Diffusion in icosahedral Al-Pd-Mn. In: Mass and Charge Transport in Inorganic Materials: Fundamentals to Devices. Proceedings of the International Conference on ..., pp. 205 - 212 (Eds. Vincenzini, P.; Buscaglia, V.). International Conference on Mass and Charge Transport in Inorganic Materials - Fundamentals to Devices, Lido di Jesolo, Venice, Italy, May 28, 2000 - June 02, 2000. Techna, Faenza (2000)

Goll, D.; Kleinschroth, I.; Kronmüller, H.: High-performance nanocrystalline PrFeB-based bonded permanent magnets. In: Proceedings of the 16th International Workshop on Rare-Earth Magnets and Their Applications, pp. 641 - 650 (Eds. Kaneko, H.; Homma, M.; Okada, M.). Japan Institute of Metals, Sendai (2000)